Produced by packings leak due to excessive wear and polished rod breakage caused by corrosion and material wear.
Produced by packing leaks, polished rod breakage,sucker rod breakage or tubing obstruction.
Produced by tubing obstruction due to salt and/or wax accumulation, rod breakage due to corrosion or material fatigue and sucker rod breakage due to wear of the tubing and couplings.
Tulsa Oilfield Equipment is a leader in the oilfield equipment industry dedicated to providing innovative solutions to a wide range of oil and gas production challenges. With years of experience and a focus on excellence, Tulsa Oilfield Equipment has established a solid reputation for providing high quality products and reliable services.
The matrix of problems faced by oilfield operators can be complex and varied. From pumping equipment leaks and premature polished rod wear to tubing blockages and gas locking in pumps, these challenges can affect production efficiency and lead to costly downtime.
This is where Tulsa Oilfield Equipment makes a difference. The company is committed to developing innovative solutions that address these problems effectively and efficiently.
Our matrix of TULSA product solutions focuses on addressing various problems and consequences that can occur in the oilfield industry. The following is a concise description of each problem and corresponding solutions using TULSA products
Wellhead spills due to packer leaks:
Primary Cause: Excessive stem wear due to scoring, marking or pitting.Secondary causes: Misaligned rod with respect to pumping shaft, salt or carbonate deposits on string, lack of lubrication due to production cut-off, lack of lubrication due to viscous oil or high water cut-off.Proposed solutions: Replace the rod, check for leaks, lubricate the rod with emulsion, or use a double packing with a lubricating chamber.Recommended Tulsa products: Safe-T with Stopleak for leakage control, Mark I for stem lubrication, Autoalign to correct misalignment, and Double Ecologic for double packing.
Wellhead spills due to rod breakage:
Root cause: mechanical damage, material fatigue or corrosion.Proposed solutions: Replace the clamp, align the sucker rod, or lubricate the rod with anti-corrosion additives.Recommended Tulsa products: Spacers for clamp replacement, Sphere Rod for stem alignment, or Mark I for lubrication with anti-corrosion additives.
Downtime due to packing losses:
Primary Cause: Excessive wear of polished rod due to scoring or pitting.Secondary causes: Wellhead misalignment with respect to the pumping shaft, salt or carbonate deposits on the rod, lack of lubrication due to production shutdown.Proposed solutions: Replace the sucker rod, check for leaks, lubricate the rod with emulsion, or use a double packing with a lubricating chamber.Recommended Tulsa products: Safe-T with StopLeak for leakage control, Mark I for stem lubrication, Autoalign to correct misalignment, and Double Ecologic for double packing.
Production loss or shutdown Tubing blockage:
Main cause: accumulation of salts, wax or other materials in the tubing.Proposed solutions: Perform thermal scraping treatment, use tubing scraper, apply magnetic fluid treatment or inject suitable chemicals.Recommended Tulsa products: Tulsa Guide + Rotor Rod for tubing scraping, Tulsa Flo for magnetic treatment.
Gas Lock in pump:
Main cause: gas accumulation in the pump due to high back pressure generated by gas in the casing.Proposed solution: Extract the gas from the casing using an eductor.Recommended Tulsa product: Tulsa eductor.